Flat Drop Fiber Optic Cable 1-12F

LiteLinx Flat Drop Cable is specifically engineered for a range of installation methods, including self-supporting, direct-buried, and duct setups. Its fully dielectric design makes it an excellent choice for drop applications, ensuring convenient access and straightforward installation.

The cable incorporates two parallel dielectric strength members, eliminating the need for bonding or grounding, and providing outstanding crush resistance. Additionally, the FRP (Fiber Reinforced Plastic) strength members are coated with EAA to enhance their adhesion properties. Can be ordered as pre-connected, choose from 1 FO to 12 FO.

Download Data Sheet

View Products

Structure Design:

Central tube PBT
Fiber 1-12F ITU-T G657A1
Central tube containing fibers and filled with a suitable water tightness filling compound
Tow parrel FRP as reinforcement
Sheath HDPE

Highlights:

Low friction installation
Flexible and kink resistant
Rapid cable termination

Specifications:

Fiber Count		1-12F
Strength Member	Material	PBT
Strength Member	Diameter (mm)	3.0
Reinforcement Elements	Material	FRP
Reinforcement Elements	Size (mm)	1.6
Outer Jacket	Material	HDPE
Outer Jacket	Thickness	0.8mm
Overall Diameter (mm)(± 0.3)		4.5*8.1
Weight	Kg/Km	37
Temperature Range	Operation	-40°C~+60°C
	Storage	-50°C~+70°C
	Installation	-20°C~+60°C

Optical Characteristics:

Attenuation Coefficient	@1310nm		≤ 0.36 dB/Km
	@1550nm		≤ 0.22 dB/Km

* Full compliance with the ITU-T G.657.A1 standard

Mechanical Performance

There is no leakage detected at the cable end during the Water Penetration Test according to IEC 60794-1-F5B.
No jacket cracking or fiber breakage in Tensile Loading, Torsion, Crush/Impact Resistance, Repeated Bending, and Temperature Cycling tests per IEC Standards.

Color Code:

The individual fibers and loose tubes comply with the TIA/EIA-598-A Standard.